Combine harvester is one of the largest agriculture machine use for harvesting crops. In the early around the 1950s, it was known as Combein. It was a combined process of complete harvesting, threshing, separating stems, and excluding trash from grain crops.
Before the combined were introduced, In 19th-century threshing machines and mechanical harvesting machines greatly increased.
Due to this it possible to harvest more grains with few workers than before. However, after the invention in the late 19th century it further improved this efficiency. That time Combine harvesters combine the complete harvesting and thresher in one step, It allowing to perform harvesting and threshing in a single operation. This also saved human resources and physical resources and considerably reduced the burden on farmers.
There are following important points that keep in mind while using a combine machine.
1. It ideally suggested that the machine operator must go through the formal training of the combine harvester manufacturer, distributor or related department before taking up the operational job. It is quite difficult to use a combine machine without having the knowledge about the working principle and operation requirements of the combine harvester.
2. Please read the Combine specification carefully before use. As we are aware the structure of the combine is complicated, even though the machine quality is very good, if you do not follow the internal structure and the usage method, you can use it casually according to experience. If you do not operate in accordance with the specification, the machine is prone to untimely failures.
3. Because the harvested crop conditions vary greatly (such as crop varieties, maturity, moisture content, yield, crop height & lodging situation, etc.), so in the use of combine harvester process, should be for changes in crop conditions Timely adjustment of the machine's various related agencies to ensure the performance of the combine harvester.
4. The safety protection device installed on the combine harvester is designed to protect the safety of the operator and its related personnel. Therefore, the machine cannot be disassembled when it is running or working. If it has been dismantled during maintenance, the machine must be restarted before operating or working. Install it. In addition, when operating the machine, it must be performed in accordance with the relevant safety warning signs to avoid accidents.
5. The combine harvester shall be inspected, maintained and maintained regularly and promptly. Such as checking whether there is a lack of oil, lack of water, whether there is loosening, whether there is a place for welding, whether there is abnormal sound and so on. If there is any abnormality, it should be replenished, adjusted and repaired in time, and the machine must not be allowed to work sick. Otherwise, large failures or damages are likely to occur.
6. In most cases, the structure and overall parameters of the combine harvester are coordinated from the design and cannot be arbitrarily changed or modified. Such as increasing the engine speed, increasing the height of the grain tank, etc., this will not only guarantee the performance of the work but also accelerate the wear and damage of the machine.
7. The new combined machine must be tested and run-in after maintenance.
8. Always make a schedule to clean, inspect, adjust, tighten, lubricate, add, and replace delicate parts of the combine harvester.
9. Always make a habit to combine harvester empty after use.
Read more: Best Farm Machinery Market
Before the combined were introduced, In 19th-century threshing machines and mechanical harvesting machines greatly increased.
Due to this it possible to harvest more grains with few workers than before. However, after the invention in the late 19th century it further improved this efficiency. That time Combine harvesters combine the complete harvesting and thresher in one step, It allowing to perform harvesting and threshing in a single operation. This also saved human resources and physical resources and considerably reduced the burden on farmers.
There are following important points that keep in mind while using a combine machine.
1. It ideally suggested that the machine operator must go through the formal training of the combine harvester manufacturer, distributor or related department before taking up the operational job. It is quite difficult to use a combine machine without having the knowledge about the working principle and operation requirements of the combine harvester.
2. Please read the Combine specification carefully before use. As we are aware the structure of the combine is complicated, even though the machine quality is very good, if you do not follow the internal structure and the usage method, you can use it casually according to experience. If you do not operate in accordance with the specification, the machine is prone to untimely failures.
3. Because the harvested crop conditions vary greatly (such as crop varieties, maturity, moisture content, yield, crop height & lodging situation, etc.), so in the use of combine harvester process, should be for changes in crop conditions Timely adjustment of the machine's various related agencies to ensure the performance of the combine harvester.
4. The safety protection device installed on the combine harvester is designed to protect the safety of the operator and its related personnel. Therefore, the machine cannot be disassembled when it is running or working. If it has been dismantled during maintenance, the machine must be restarted before operating or working. Install it. In addition, when operating the machine, it must be performed in accordance with the relevant safety warning signs to avoid accidents.
5. The combine harvester shall be inspected, maintained and maintained regularly and promptly. Such as checking whether there is a lack of oil, lack of water, whether there is loosening, whether there is a place for welding, whether there is abnormal sound and so on. If there is any abnormality, it should be replenished, adjusted and repaired in time, and the machine must not be allowed to work sick. Otherwise, large failures or damages are likely to occur.
6. In most cases, the structure and overall parameters of the combine harvester are coordinated from the design and cannot be arbitrarily changed or modified. Such as increasing the engine speed, increasing the height of the grain tank, etc., this will not only guarantee the performance of the work but also accelerate the wear and damage of the machine.
7. The new combined machine must be tested and run-in after maintenance.
8. Always make a schedule to clean, inspect, adjust, tighten, lubricate, add, and replace delicate parts of the combine harvester.
9. Always make a habit to combine harvester empty after use.
Read more: Best Farm Machinery Market
ConversionConversion EmoticonEmoticon